Skift Valuta: GBP

Skift sprog: DeutschDanskEnglish (UK)English (US)EspañolFrançaiseעברית (ישראל)DutchTürkçe

J1 Ford Focus RS Mk2 Performance Air Intake Kit

£200.00 (ex VAT)

Dette produkt er i øjeblikket udsolgt

Produkt Information

20-20411-02 J1 Ford Focus RS Mk2 Performance Air Intake Kit

This performance Air Intake Kit includes an Air Cleaner Cover replacement, a Performance Air Filter and Silicon Proimary and Secondary hoses for the Ford Focus RS Mk2.

With an increased intake effective cross sectional area, and improved air cleaner internal volume, the air intake's restriction has dropped by over 50% allowing more air into the system increasing both engine torque and power. The performance Air Filter improves breathability compared to the standard paper filter, and the silicon hoses provide a smoother flow and offer a more robust solution to the existing convoluted hoses. Offered in Green, White or Blue, this kit can also improve your underbonnet styling.

The installation is simple and quick, no modifications are required, and full instructions are included.

This kit is suitable for the Focus Mark 2, manufactured from 2009 onwards.

Kit includes;

  • High Quality Polycarbonate Air Cleaner Lid (integrated Green, White or Blue 'j1' logo)
  • Nylon Cable Tie
  • High Performance cotton (Pre oiled) Air Filter
  • Primary Silicone intake Hose (Green, White or Blue)
  • Secondary Silicone intake Hose (Green, White or Blue)
  • Fitting Instructions

System pressure loss is reduced by over 50% (increased intake section, Increased Air Cleaner volume, Cotton Air Filter, Silicon Hoses) boosting engine torque and power - 10.7 BHP at peak on standard non remapped cars, and improved torque of +32 lbf.ft in the mid range.

Key Benefits;

  • Well engineered products,
  • Power increase of 10.7 BHP on non adjusted cars (Vehicle Dyno Tests*),
  • Increases in Torque of 32lbf.ft (Vehicle Dyno Tests**),
  • Easy installation (10 minutes),
  • UK Designed, Developed and Manufactured,
  • High Quality products,

High Quality Stainless Steel Hose Clamps can also be purchased to suit.

2 x Hose Clamp 60-80mm
2 x Hose Clamp 40-60mm

* Tested at AMD Essex on 10th November 2011 (standard Vehicle) - would expect to see larger gains on remapped vehicles of between 15 and 20bhp!!!

 

** Tested at South West in Car Tech on 9th September 2011.

Fitting Instructions

Click here to view the comprehensive fitting instructions.

Technical Information

Click here to view additional technical information including restriction and power graphs.

 

Produkt Kode: 20-20411-02

Kundeanmeldelser

Dette produkt er endnu ikke anmeldt. Skriv en anmeldelse

 

Mobile Site

"FR&R Tuning" vil gerne placere cookies på din computer for at hjælpe os med at gøre denne hjemmeside bedre. For at finde ud af mere om cookies, se vores privacy policy.

Jeg accepterer cookies fra dette site.

eCommerce by FR&RTuning